Install the solid state drive – Rockwell Automation 6189V-xxxx Solid State Drive Upgrade Kit for Panel PC User Manual
Page 5
Publication 6181P-IN006A-EN-P - January 2006
Solid State Drive Upgrade Kit 5
Install the Solid State Drive
1200P and 1500P Installation
1. Attach the SSD to the mounting plate using (4) M3 pan head
screws.
2. Attach the mounting plate and drive to the chassis using (4) M3
pan head screws.
Use existing screws from the HDD mounting assembly.
3. Connect the IDE adapter/cable to the SSD.
4. Place the adapter retention clamp over the adapter and line up
the screw holes.
5. Fasten the retention clamp to the mounting bracket with (2) M3
flat head screws.
ATTENTION
!
Electrostatic discharge (ESD) can damage the
computer and components. Make sure you work in a
static-safe environment and wear a grounding strap
whenever handling circuit boards, memory or other
internal components.
Solid State Disk Drive
Mounting Plate
Retention Clamp
IDE Adapter
Chassis
1200P