Rockwell Automation 1798-IE4 FlexArmor Analog Input Module - Manual

Publication 1798-IN007A-EN-P - April 2002
Installation Instructions
FlexArmor Analog Input Module
Catalog Number 1798-IE4
The FlexArmor I/O module (Cat. No. 1798-IE4) mounts in a
FlexArmor Baseplate. Use compatible sealed cordsets to connect all
field side wiring. All cordsets must be shielded to achieve proper
noise immunity.
The 1798-IE4 module provides connections for up to 4 single ended
non-isolated inputs. This module has four 12 mm connectors
configured for analog input. A diagnostic feature for this module
includes sensor power short-circuit detection. The inputs can be
either voltage or current.
Package Contents
Your package contains one FlexArmor 1798-IE4 module and these
installation instructions. (Note: Baseplates and other components are
ordered and shipped separately.)
42999