Required tools – Rockwell Automation 2706 Dataliner 20 Message Display User Manual
Page 4
Advertising
![background image](/manuals/580419/4/background.png)
Dataliner DL20 Message Display
4
Allow enough space within the enclosure for adequate ventilation. Consider heat
produced by other devices in the enclosure. The ambient temperature around the
display must be between 0
_ and 60_C (32_ and 140_F).
Make provisions for accessing the back panel of the display for wiring,
maintenance, and troubleshooting.
Required Tools
Other than the tools required to make the panel cutout, the tools required for
installation are:
•
3/8 inch deep well socket wrench
•
small slotted screwdriver
•
torque wrench (in. / lbs).
Advertising