Additional resources – Rockwell Automation 2080-LC20-20QWB_20AWB_20QBB_20QWBR_20AWBR_20QBBR Micro820 20-Point Programmable Controllers User Manual
Page 6
6 Micro820 20-Point Programmable Controllers
Publication 2080-IN009B-EN-P - April 2014
Additional Resources
If you would like a manual, you can:
• download a free electronic version from the Internet:
• purchase a printed manual by contacting your local Allen-Bradley distributor or
Rockwell Automation representative
ATTENTION:
•
To comply with the CE Low Voltage Directive (LVD), this equipment must be
powered from a source compliant with the following: Safety Extra Low
Voltage (SELV) or Protected Extra Low Voltage (PELV).
•
To comply with UL restrictions, this equipment must be powered from a
Class 2 or Limited Voltage Limited Current Source (LVLC).
•
For Class I Division 2 applications, use only Class I Division 2 listed or
recognized accessories and modules approved for use within the Micro800
®
platform.
ATTENTION:
•
Electrostatic discharge can damage semiconductor devices inside the
module. Do not touch the connector pins or other sensitive area pins.
•
Be careful when stripping wires. Wire fragments that fall into the controller
could cause damage. Once wiring is complete, make sure the controller is
free of all metal fragments.
•
Do not connect directly to line voltage. Line voltage must be supplied by a
suitable, approved isolating transformer or power supply having short
circuit capacity not exceeding 100 VA maximum equivalent.
Resource
Description
Micro820™ 20-point Programmable
Controllers User Manual, publication
A more detailed description of how to install and use your
Micro820 programmable controller.
Micro800
®
Plug-in Modules User Manual,
publication
Installation and wiring descriptions for the different Micro800
plug-in modules.
Micro800 AC Power Supply Installation
Instructions, publication
Information on wiring and installing the optional AC power supply.
Micro820 Remote LCD Installation
Instructions, publication
Information on wiring and installing the Micro800 Remote LCD,
2080-REMLCD.
Industrial Automation Wiring and
Grounding Guidelines, publication
More information on proper wiring and grounding techniques.