Rockwell Automation 2727-M7P20D1P1, -M7P20D1Q2, -M7P20D1Q3 MobileView Machine Terminal MT750 Quick Start - Manual (Page 21)

MobileView Machine Terminal MT750 21
Publication 2727-QS003E-MU-P
Starting Terminal Services
To connect to a terminal server as a CE client:
1. Double-tap the Terminal Server Client shortcut on the desktop of the
MobileView terminal or select the Terminal Server Client application from
the Programs>Terminal Server Client folder on the Start menu.
2. Enter the Terminal Server’s Name or a valid TCP/IP address in the Server
box using the on-screen input panel or select a server name or address from
the Recent Servers box.
3. Tap the Connect button. A server log on window similar to the one below
appears.
4. Enter your user name and password to operate as an active CE client.
Shutdown/Power Off
1. Close down all applications that are running on CE client.
2. Tap the Start button on the CE client task bar. Select Shutdown and then
Log Off to disconnect from the terminal server.
3. Remove 24V dc power from the MobileView junction box or disconnect the
MobileView connection cable from the junction box cable.
TIP
Time/Date/Regional Setting information is not saved during a
reboot.