Rockwell Automation 8520 9/Series Hardware TAB 5 - Manual (Page 115)

Section 5B
9/440HR CNC/Drive System
5B-41
Figure 5B.29
Power Terminal Block (22 kW Series C)
9/440 High–resolution
System Module
Wiring Board
E–Stop
Connections (TB1)
Power Terminal Block
24 Volt logic power is supplied to the 9/440HR to run the processor board
and axis module logic boards. The 24 volts are provided from a customer
supplied transformer. Specifications for this supply are:
Transformer Input Voltage 9/440HR Input Voltage Range (Transformer Output) Number of Axis Modules
125/240 V ac
(85-265 V ac @50/60 Hz) 24V ac (19 – 28V ac, single phase @50/60 Hz)
or 1 2 3 4
(85-265 V ac @50/60 Hz) or
24V dc (18 75 31 25V)
3.5 A 4.4 A 5.2 A 6.0 A
24V dc (18.75 – 31.25V)
3.5 A 4.4 A 5.2 A 6.0 A
On/Off connections are made through the Allen-Bradley On/Off Control
assembly (8520-OFC). This assembly allows connection to the standard
MTB panel on/off switch and should be used to supply power to your 24 V
transformer.
5B.5.1
On/Off Control and
24V Logic Power