Rockwell Automation 2706-NP5 DL5 OFFLINE PROGRAMMER USER MANUAL - Manual (Page 21)

Chapter 4
Running DL5 Off-line Programmer
4–8
4. Enter [1] at the first prompt if you have a one-line display or [2] if it is a
two-line display.
5. Enter [1] at the second prompt if the DL5 has 0.5K memory, [2] if the
memory size is 2K, or [8] if the memory size is 8K.
Make sure the memory size you enter corresponds with the DL5 you are
creating the messages for. The messages may not download if you
specify the wrong memory size.
You may select the default value of [2] by pressing the [RETURN] or
[ENTER] key for both prompts.
6. Press [END] to save the configuration for this DL5 Message Display.
Creating a New Message
You can now create a message for the DL5 that you have named. You will
also be able to define attributes for the message that will control how it is
displayed on the DL5.
Option 3
Edit or Create
DL5 Messages