Rockwell Automation 9101-1183, formerly 9101-1079 200 Watt Passive Shunt Module Installation Instructions - Manual (Page 7)

Publication 2090-IN003A-EN-P — November 2002
200 Watt Passive Shunt Module 7
Product Specifications Specifications for the passive shunt module are provided in the
following tables. Physical measurements are shown in Figure 4 on
page 8.
General Specifications Description
Weight net 1.1 kg (2.5 lbs)
shipping 2.1 kg (4.5 lbs)
Resistance 25
Ω ± 10%
Power rating peak 6000 W
continuous 200 W
Fuse 4.5 Amp, 600 VDC, slow acting
(Littelfuse® CCMR type)
Environmental Conditions Value
Vibration 2g at 10 to 2000 Hz
Shock 15g 11 msec half sine
Altitude 1500 m (5000 ft)
Humidity 5% to 95% non-condensing
Ambient operating temperature 0° to 50° C (32° to 122° F)
Air flow clearances 87 mm (3.4 in.) on all sides for air flow.
Mounting Hardware Size
Hex cap screws 1/4 in. - 20
Hex cap screws (metric) M6
Wiring Size
90°C (194° F), 600V copper wire 2.5 mm
2
(14 AWG)
Maximum length 914.4 mm (36.0 in.)
Terminal Block Screws Torque
Chrome plated brass 2.25 Nm (20 lb-in.)