Rockwell Automation 2500 CENTERLINE MCC Shipping, Handling and Receiving Instructions User Manual
Page 4
Publication 2500-IN002A-EN-P—May 2006
4 CENTERLINE® 2500 Motor Control Centers Receiving, Handling and Storing
with the appropriate number of lifting angles for your motor control center
and follow the overhead lifting procedure.
1.
Attach rigging to overhead crane, hoist or similar lifting device.
2.
Do not pass ropes or cables through the support holes in the lifting
angle. Use slings with load-rated hooks or shackles.
3.
Select or adjust the rigging lengths to compensate for any unequal
weight distribution of the load and support the motor control center in
an upright position.
4.
Reduce tension on the rigging and compression on the lifting angle by
ensuring the angle between the lifting cables and vertical plane does not
exceed 45°.
ATTENTION
!
Ensure that the load rating of the lifting device is sufficient
to handle the load safely. Refer to the packing slip included
with the shipment for weights.
ATTENTION
!
Some motor control centers contain heavy mounted
equipment that could be adversely affected if tilted.