Rockwell Automation 8520 9/PC CNC Tool Path Graphics Programming Manual - Manual

Publication 8520-PM097A-EN-P - September 2001
Programming Manual
9/PC CNC Tool Path Graphics Programming
Manual
Read This First
This programming manual applies to 9/ PC CNC system users who use the part program
graphic verification feature (release 3.01 or greater).
About Tool Path Graphics
The 9/ PC CNC Tool Path Graphics application is designed to provide you with a pictoral
means of plotting the path of your part program. Currently, this feature only operates while
your axes are moving. Refer to the following sections for details about this utility.