Disabling graphics, Clearing the graphics screen – Rockwell Automation 8520 9/PC CNC Tool Path Graphics Programming Manual User Manual
Page 16
Advertising
16 9/PC CNC Tool Path Graphics Programming Manual
Publication 8520-PM097A-EN-P - September 2001
Disabling Graphics
In the event that it is more convenient to operate without the Tool Path Graphics utility, you
have the option to operate your 9/ PC without it.
To disable graphics:
1. Press the
{PRGRAM MANAGE} softkey on level one.
2. Select the
{ACTIVE PRGRAM} softkey on level 2.
3. Press the
{T PATH DISABL} softkey:
Clearing The Graphics Screen
You can clear the screen if it becomes too cluttered because of many different tool paths.
Clear the currently drawn tool paths by pressing the
{CLEAR PLOT} softkey. Any tool
paths on the screen are erased and the plot continues from the current tool location without
stopping.
Advertising