Rockwell Automation 2706 DL40 Plus Message Displays Firmware Upgrade Utility - Manual (Page 4)

4 Firmware Upgrade Utility
9. Select Serial Port from the menu. This specifies the serial port
connecting your computer to the DL40 Plus.
Use the Up and down arrow keys to highlight the port and press [Enter]
to return to the main menu.
10. Select Update Firmware from the main menu. When prompted, cycle
the power on the DL40 Plus (turn off and then back on).
A screen identifying the DL40 and its current firmware is displayed
along with the update firmware you are going to download. You are
prompted whether or not to continue with the firmware upgrade.
To cancel the upgrade, press any key other than [Y]. Press [Y] to
continue with the upgrade.
Note: The numbers in parentheses (i.e. 0D67) are the firmware Cyclic
Redundancy Check (CRC) values and are provided for reference only.
DL40 Plus Firmware Update Utility v1.00 Allen-Bradley Company (C) 1998
Select the serial port connected to DL40 Plus
(Highlight with arrow key then press ENTER)
COM1
COM2
COM3
COM4
or
or
Your DL40 Plus firmware is newer than the update.
Do you wish to INSTALL the firmware anyway?
4-Line DL40 Plus RIO
Current firmware: v1:00 (0D67)
Update firmware: v1.01
(A034)
Your DL40 Plus firmware is older than
the update. Do you wish to UPGRADE the
firmware?
‘Y’ to CONFIRM, any other key to ABORT
DL40 Plus Firmware Update Utility v1.00 Allen-Bradley Company (C)
Your DL40 Plus firmware is up to date.
Do you wish to REINSTALL the firmware anyway?