Rockwell Automation 2097-TB1 I/O Terminal Expansion Block Installation Instructions - Manual

Installation Instructions
Bulletin 2097 I/O Terminal Expansion Block
Catalog Number 2097-TB1
About the I/O Terminal Expansion Block
The I/O terminal expansion block lets you wire I/O directly to the Kinetix® 300 or Kinetix 350
drive without the use of an extension cable and a separate terminal block. The I/O terminal
expansion block securely mounts to the drive with its own mounting screws, simplifying I/O
wiring.
This publication provides installation and wiring instructions for the I/O terminal expansion
block. For more information refer to the user manual available for your drive listed in Additional
Resources on page 8 .
Topic Page
About the I/O Terminal Expansion Block 1
Important User Information 2
Before You Begin 3
Install the I/O Terminal Expansion Block 4
Wire the I/O Terminal Expansion Block 5
Additional Resources 8