Rockwell Automation 2085-IRT4 Micro800 4-channel Thermocouple/RTD Input Module - Manual (Page 10)

10 Micro800 4-channel Thermocouple/RTD Input Module
Publication 2085-IN007A-EN-P - September 2012
Input type Thermocouple type: B, C, E, J, K, TXK/XK (L), N, R, S, T
RTD type:
100
Ω Pt α = 0.00385 Euro
200 Ω Pt α = 0.00385 Euro
100 Ω Pt α = 0.003916 U.S
200 Ω Pt α = 0.003916 U.S.
100 Ω Nickel 618
200 Ω Nickel 618
120 Ω Nickel 672
10 Ω Copper 427
mV range: 0…100 mV
Ohm input: 0…500
Ω
Resolution 16 bits
Channel update time, typical 12…500 ms per enabled channel
Input impedance > 10 M Ω
Power dissipation, total 2 W
Enclosure type rating None (open-style)
Status indicators 1 health status indicators
Isolation voltage 50V (continuous), Reinforced Insulation Type, channel to system.
Type tested at 720V DC for 60 s
North American temp code T4
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines,
publication
1770-4.1 .
(2) RTB hold down screws should be tightened by hand. They should not be tightened using a power tool.
Environmental Specifications
Attribute Value
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-20…65 °C (-4…149 °F)
Temperature, surrounding air, max 65 °C (149 °F)
Temperature, non-operating IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock):
-40…85 °C (-40…185 °F)
Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat):
5…95% non-condensing
Vibration IEC 60068-2-6 (Test Fc, Operating):
2 g @ 10…500 Hz
Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock):
25 g
Shock, non-operating IEC 60068-2-27 (Test Ea, Unpackaged Shock):
25 g – DIN rail mount
35 g – Panel mount
General Specifications
Attribute Value