Rockwell Automation 2707-M232P3_M485P3 DTAM Micro Operator Interface Module - Manual (Page 95)

Appendix B
DTAM Micro Cable Diagrams
B–5
Catalog No. 1747-CP3
Use this RS-232 Communications Cable to connect the RS-232 port of the
DTAM Micro (Catalog No. 2707-M232P3) to Channel 0 of an SLC 5/03.
A 9 pin female to male gender adapter is required when using this cable.
If you are making your own cable, use a 9 pin male connector on the DTAM
Micro end instead of the 9 pin female connector shown below. In addition,
the control lines are not needed.
DTAM Micro RS-232
Communication Port
CD
RXD
TXD
DTR
1
2
3
4
5
9-Pin Female D Connector
6
7
8
9
COMMON
DSR
RTS
CTS
RI
CD
RXD
TXD
DTR
1
2
3
4
5
6
7
8
9
COMMON
DSR
CTS
RTS
RI
9-Pin Female D Connector
SLC 5/03 Channel 0 Port
RS-232
Note: A gender adapter is required when
using the 1747-CP3 cable. If you are
creating your own cable, use a male
connector on the DTAM Micro end.
= Not used for DTAM Micro
The control lines (pins #1, #4, #6, #7, and #8) are not used by the DTAM
Micro. The connections to these pins can be deleted for this application.