Rockwell Automation 9904-RPFM ControlNet Modular Repeater Medium-distance Fiber Module Installation Instructio - Manual (Page 3)

ControlNet Modular Repeater Medium Distance Fiber Module 3
Publication 9904-IN011A-EN-P - October 2000
European Communities (EC) Directive Compliance
If this product has the CE mark it is approved for installation within the European
Union and EEA regions. It has been designed and tested to meet the following
directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EC Electromagnetic
Compatibility (EMC) by applying the following standards, in whole or in part,
documented in a technical construction file:
•
EN 50081-2 EMC — Generic Emission Standard, Part 2 — Industrial
Environment
•
EN 5001082-2 EMC — Generic Immunity Standard, Part 2 — Industrial
Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low Voltage, by
applying the safety requirements of EN 61131-2 Programmable Controllers, Part 2 -
Equipment Requirements and Tests. This equipment is classified as open
equipment and must be mounted in an enclosure during operation to provide
safety protection.
Fiber Optic Safety Statements
ATTENTION
!
Do not look directly into the fiber ports. Light levels will cause
damage to your eyesight.