Rockwell Automation 57C570 PC3000 Drive Controller Hardware - Manual

AutoMax PC3000 Packaged Version
Model Number 57C570
Instruction Manual J2-3101-1
CAUTION: The printed circuit boards are static-sensitive. You should wear an anti-static wrist band (user
supplied) while installing the cards. Avoid touching the cards’ components, connectors, or leads. Hold the
cards only by their edges. Failure to observe this precaution could result in damage to or destruction of
the equipment.
Product Description
The AutoMax PC3000 Packaged Version is designed for a plant-floor environment. It includes:
• AutoMax PC3000 Processor card (M/N 57C560)
• AutoMax PC3000 Serial card (M/N 57C565)
• Panel-mount, industrial-grade enclosure with a passive six-slot ISA bus and 150 W power supply
• Bag of accessories (includes one extra fan filter)
Connect the AutoMax PC3000 Packaged Version to a programming device using Port B on the Serial card
or via the AutoMax DCS-NET network. Use the AutoMax PC3000 as a drive supervisor for Reliance
standard drives (FlexPak 3000 and GV3000) that have the Network Option Board installed or as a remote
I/O scanner for any device that iscompatible with an Allen-Bradley Remote I/O link.
DANGER
ONLY QUALIFIED PERSONNEL FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF
THIS EQUIPMENT AND THE HAZARDS INVOLVED SHOULD INSTALL, ADJUST, OPERATE, AND/
OR SERVICE THIS EQUIPMENT. READ AND UNDERSTAND THIS INSTRUCTION MANUAL IN ITS
ENTIRETY BEFORE PROCEEDING. FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT
IN SEVERE BODILY IN JURY OR LOSS OF LIFE.
Reliance®, and FlexPak® are registered trademarks of
Reliance Electric Company or its subsidiaries.
Phoenix and Combicon are registered trademarks of Phoenix Contact Ltd.
©Copyright Reliance Electric Industrial Company, 2000.