Rockwell Automation 57C570 PC3000 Drive Controller Hardware - Manual (Page 3)

3
Mounting the AutoMax PC3000 Packaged Version
You can mount the AutoMax PC3000 Packaged Version on a panel in an enclosure. Figure 2 shows the
mounting dimensions of the AutoMax PC3000 Packaged Version.
Figure 2 - AutoMax PC3000 Packaged Version Mounting Dimensions
To mount the AutoMax PC3000 Packaged Version, follow these steps:
Step 1. Mark the locations of the bracket holes on the panel. Make sure to leave a space of about
22.9 cm (9 in.) next to the side of the chassis containing the network connection and serial
ports. You need this space for attaching the cable connectors. Use figure 2 as a guide.
Step 2. Secure the AutoMax PC3000 Packaged Version to the panel with four #10-32 screws.
25.4 mm
1.0 in.
282.0 mm
11.10 in.
25.4 mm
1.0 in.
196.0mm
7.72 in.
180.6 mm
7.11 in. 8-05.2
8-010
305.0 mm
12.0 in.
20836-M