Rockwell Automation 2727-MRJB2 MobileView Terminal Junction Box - Manual

Publication 2727-IN010A-EN-P - May 2004
Installation Instructions
MobileView Junction Box
(Catalog Number 2727-MRJB2)
English
The MobileView Junction Box (2727-MRJB2) integrates the following terminals into
the control system:
•
MobileView Guard G750
•
MobileView Machine Terminal MT750
The Junction Box can be used either inside or outside a control cabinet based on its
IP65 rating.
The cables that connect the MobileView terminal to the Junction Box are available
as separate catalog numbers.
•
MobileView Connection Cable (Catalog Numbers 2727-MRTxx) connects the
MobileView terminal to the Junction Box. The Connection Cable is available
in 5, 10, 15, 20 meter (16.4, 32.8, 49.2, 65.6 foot) lengths.
•
MobileView Junction Box Cable (2727-MREY1) connects the Junction Box to
the MobileView Connection Cable when the Junction Box is mounted inside
a cabinet. The cable is 2 meters (6.56 feet) long.
Inside. . .
Junction Box Dimensions and Connections ...................................................................... 2
Mounting the Junction Box on a DIN Rail ......................................................................... 3
Connecting the MobileView Terminal to the Junction Box ............................................... 5
Junction Box Pinout and Wiring ........................................................................................ 6
Specifications .................................................................................................................... 7