Rockwell Automation 2727-MRJB2 MobileView Terminal Junction Box - Manual (Page 4)

4 MobileView Junction Box
Publication 2727-IN010A-EN-P - May 2004
To remove the Junction Box from the DIN rail:
1. Place a screwdriver in the adapter latch at the bottom of the Junction Box.
2. Holding the Junction Box, pry downward on the latch until the Junction Box
is released from the DIN rail.
Mounting Junction Box to a Wall
Use the dimensions below for drilling the holes to mount the MobileView Junction
Box to a wall. Use the manufacturer’s recommendation for hole size based on the
screw type and mounting surface.
40 mm (1.58 in)
155 mm (6.10 in)
10.2 mm (0.
40i
n)
64.8 mm (2.
55 in)