Rockwell Automation 2711E PanelBuilder 1400e Modbus Communications - Manual (Page 22)

Chapter
3
Publication 2711E-6.12 – November 1997
Basic Application Operations
This chapter supplements the information in the PanelBuilder 1400e
Configuration Software for Windows User Manual, publication
2711E-819. It describes only changes to basic application operations
for the Modbus network. For detailed information about other basic
application operations, consult Chapter 3, “Working with
Applications,” in the PanelBuilder 1400e Configuration Software for
Windows User Manual, publication 2711E-819.
This chapter describes how to create a new application, and some
changes to report options.
Note: PanelView 1200 and 1200e terminals do not support Modbus
communications.
To create a new application for Modbus:
1. Select the Application Type and highlight the Modbus option in
the Network Type list box.
2. Choose OK.
Creating reports for a Modbus application is the same as for DH+
and Remote I/O applications. The only difference is the PLC
Communications report.
For detailed information about creating reports, see “Creating
Application Reports” in Chapter 3, “Working with Applications,” in
the PanelBuilder 1400e Configuration Software for Windows User
Manual, publication 2711E-819.
"
Creating a New
Application
Creating Reports