Rockwell Automation 2711E PanelBuilder 1400e Modbus Communications User Manual
Page 40
Advertising
6–3
Defining Tags
Publication 2711E-6.12 – August 1997
Configuring an Analog Tag
1. If the tag is part of a folder, select that folder in the folder
hierarchy. The folder name appears in the Name field and is the
first part of the tag name.
2. Type a tag name. If the tag is part of a folder, type the name after
the backslash (\).
3. For Type, select Analog.
4. Fill in the fields as outlined below:
Security
This field is reserved for RSView databases. You cannot enter
anything in the Security field.
Description
Type a description of this tag up to 128 characters long.
Minimum and Maximum
These fields are reserved for RSView databases. You cannot enter
anything in the Minimum and Maximum fields.
Advertising