Rockwell Automation 2711E PanelBuilder 1400e Modbus Communications - Manual (Page 67)

Chapter
8
Publication 2711E-6.12 – November 1997
Transferring Applications
Before you can transfer an application to a PanelView terminal, you
will need to validate the application to ensure that it can be compiled
for use on the terminal. For information about validating
applications, see Chapter 3, “Working with Applications,” in the
PanelBuilder 1400e Configuration Software for Windows User
Manual. For a complete list of validation error messages and their
meanings, see Appendix D, “Troubleshooting,” in the PanelBuilder
1400e Configuration Software for Windows User Manual.
It is not currently possible to transfer applications from a personal
computer to a remote PanelView terminal over a Modbus network.
To transfer application files to or from PanelView terminals running
Modbus-capable firmware, perform a serial upload or download, as
described in the PanelView 1200/1400e Transfer Utility User
Manual, Catalog Number 2711E-6.8.
For information about configuring the PanelView terminal for
application file transfers, and about running the application at the
terminal, refer to the PanelView 1000e, 1200e, and 1400e Operator
Terminals User Manual, Catalog Number 2711E-821.
Validating Applications
About Application File
Transfers and Modbus