Rockwell Automation SP200 AC Drive Remote Keypad M/N S20-RK1 - Manual (Page 13)

About the Remote Keypad 1-1
English
C
HAPTER
1
About the Remote Keypad
The Remote Keypad can be used to change parameter
values, display operating conditions, and command drive
operation. It connects to the drive’s circular mini-DIN
connector via a connector cable (see section 1.4 for more
information). It is compatible with all SP200 drive models
(see section 1.6 for more information). Figure 1.1 shows the
Remote Keypad. Refer to Appendix A for Remote Keypad
dimensions.
Figure 1.1 – Remote Keypad