Rockwell Automation SP200 AC Drive Remote Keypad M/N S20-RK1 - Manual (Page 17)

About the Remote Keypad 1-5
English
1.4 Related Hardware
The Remote Keypad connects to the SP200 AC Drive using
a connector cable. This cable must be purchased separately.
The following model numbers are available:
• M/N S20-KC1 – 1-meter Connector Cable
• M/N S20-KC3 – 3-meter Connector Cable
• M/N S20-KC5 – 5-meter Connector Cable
1.5 Related Publications
You must be familiar with all the instruction manuals that
describe your system. This can include, but is not limited to:
• Installing and Operating the SP200 AC Drive (D2-3408)
• SP200 AC Drive Quick Start Guide (D2-3418)
1.6 Compatibility with Earlier Versions of
the Drive
The Remote Keypad is compatible with all versions of the
SP200 AC Drive software, with the following exception.
For drives having software revision 3.1 and earlier, the JOG
key is not functional. The drive will not respond when the
JOG key is pressed.