Rockwell Automation T3480 ICS Regent Guarded Analog Output Modules - Manual (Page 14)

Guarded Analog Output Modules (T3480)
1 4
Industrial Control Services
1) Set the Module Type:
Position the cursor on the module slot you wish to define.
Choose Set Module Type from the Edit Menu and select
the Guarded analog output module from the list.
2) Edit the Module Definition:
Choose Edit Module Definition from the Edit Menu. A
dialog box will open where you can define the analog
output point definitions.
Figure 8. Guarded Analog Output Module Definition.
3) Edit each point:
Choose Edit from the Module Definition dialog box to
define a name and description for each output point. In
the Analog Output Point dialog, enter names and values
for the configuration fields as described below.