Rockwell Automation T3480 ICS Regent Guarded Analog Output Modules User Manual
Page 24
Advertising
![background image](/manuals/580916/24/background.png)
Guarded Analog Output Modules (T3480)
2 4
Industrial Control Services
Figure 14. Location of Test Points for Latent Fault Testing.
Testing Steps
1. Remove the module to be tested from the I/O chassis.
2. Install the I/O extender module into the slot from which
the module was removed.
3. Remove the jumpers (if installed) labeled CH1 through
CH16 from the I/O extender module.
Advertising