Rockwell Automation 20G PowerFlex 750-Series Replacement Board Kits - Manual (Page 5)

Rockwell Automation Publication RA-IN028C-EN-P - January 2013
PowerFlex 750-Series Board Replacement Kits 5
600/690V Frame 6 Drives
AC Precharge Board
SK-R9-PCG1-FF6
Step 2: See page 6 .
DC Precharge Board
SK-R9-PCG2-FF6
Step 2: See page 6 .
Power Interface Boards
600V: SK-R9-PINT1-EF6A, B, C, D, E, F, G H, J, K, M, N, P
690V: SK-R9-PINT1-FF6A, B, C, D, E, F, G H, J, K, L, M, N
Step 2: See page 7 .
1
M6 x 1.0
5.2 N•m (46 lb•in)
2.6 N•m (23 lb•in)
T20
2.6 N•m (23 lb•in)
T20
PE-B
IMPORTANT: Power Jumpers may need to be removed
during this procedure. Note where the PE-A and PE-B
jumper wires are terminated before disassembly. Use the
same position when installing the replacement board.
Disconnected Connected
Disconnected Connected