Rockwell Automation 1440-TPR06-00RE XM-360 Process Module - Manual (Page 53)

Publication GMSI10-UM006C-EN-P - August 2010
Configuration Parameters 45
Sensor Input Range Defines the valid range of the input signal. Options: 0 to 5 Volts
0 to 10 Volts
4 to 20 mA
-5 to 5 Volts
1 to 5 Volts
0 to 20 mA
0 to 1 Volt
Data Units Defines the data units of the measured value.
High Scale Limit Sets the output value corresponding to the high end
of the Sensor input range. Defines how the input signal should
be scaled into a measurement value.
Note: A sensor-out-of-range condition
exists when the output value is
outside this range.
Low Scale Limit Sets the output value corresponding to the low end
of the Sensor input range.
Channel Parameters
Parameter Name Description Values/Comments
Data Units
Options Quantity of
Measure
Deg C
Deg F Temperature
PSI
inHg
mbar
Pa
kPa Pressure
CFM Flow
m/s2
g
gSE Acceleration
mA Electrical Current
RPM
Hz Frequency
ips
mm/s Velocity
mm
um (micro
meter)
in
mil Displacement
V Voltage
radian
revolution
degree Rotational Angle
percent percent
unspecified unspecified