Rockwell Automation MDO32BNS 32-Channel Digital Output Module - Manual (Page 7)

MDO32BNS October 2005 – Issue 7 7
Triguard SC300E MDO32BNS 32-Channel Digital Output Module
Figure 2-2. Basic field load circuit
Module connectors
The System bus connector is J1 and the Common Interface is connected via J4 and J5 (not shown). In
the external connection diagram (Figure 2-3) the following symbols are used:
0
= First mate (long pin)
x = Connector pin
GND = Connected to chassis
+ve = Field supply in
-ve = Field supply return
O/P = Channel output