Rockwell Automation AADvance Controller OPC Portal Server User Manual
Page 28
3-2
Document: 553701
(ICSTT-RM407_EN_P) Issue: 03:
OPC Portal Server User Guide (AADvance Controller)
The message will reappear the next time you start the AADvance Workbench
application and build or rebuild a project.
3)
Click Yes.
The OPC Server configuration wizard starts.
The wizard provides a series of screens. Work through the screens in
sequence.
4)
The Source ISaGRAF Project step identifes your AADvance Workbench
project file, click Next.
5)
At the Include ISaGRAF Internal Variables step, select the box Generate
OPC items for ISaGRAF internal variables, click Next.
6)
At the Include Server Constants step, put a tick in the box labelled Include
automatic Server Constants.
The wizard populates the list of server constants automatically.
7)
Click Next.
8)
At the Include Server Functions step, select the box Include automatic
Server Functions.
The wizard populates the list of server functions automatically.
9)
Click Next.
10)
At the Where to place the generated configuration file step, do the
following:
a.
If you wish to change the disk location of the file, for example to specify a
network drive, use the Destination Folder to specify the location. Otherwise,
leave this field blank to use the default location.
b.
If you wish the OPC Portal Server to ignore the new file, for example because
the server is supporting another project, remove the tick in the box labelled
Update. Otherwise, make sure there is a tick in the box labelled Update.
11)
Click Next.
The wizard generates the configuration file.