Rockwell Automation T7491 ICS Regent+Plus Mixed I/O Modules - Manual (Page 13)

Multiplexed I/O Module (T7491)
P D - 7 0 3 5 M a r - 0 6
13
through 15). You may also enter a description to annotate
the MIU processor definition.
Each MIU processor has an ID number that must be
unique from other processors connected to the same Mux
I/O module. This number should match the ID number set
by links on the MIU processor unit. Refer to the product
description for the MIU Processor for details on link
settings.
4) Define the MIU I/O Modules:
In the MIU Processor Definition Dialog Box, position the
cursor on one of the four possible Mux I/O Units and
choose Edit (or Insert). Choose Input Unit or Output Unit
from the New Multiplexed Unit Dialog Box.
If both Input Units and Output Units will be connected to
a single MIU processor, the Output Units must be defined
before the Input Units.
Figure 8. The New Multiplexed Unit Dialog Box.
After selecting the type of I/O module a new dialog box will
open where you can enter a description to annotate the I/O
unit.
Important!
Important!