Rockwell Automation T7491 ICS Regent+Plus Mixed I/O Modules - Manual (Page 15)

Multiplexed I/O Module (T7491)
P D - 7 0 3 5 M a r - 0 6
15
Figure 10. The Mux Input Point and Mux Output Point
Dialog Boxes.
Name
Also called the tag name, this is the name used in the
application program to reference an input point status or
control an output point. The name can be up to 12 characters
long.
Description
The 40-character field provides a place to describe the input or
output point definition. The description is used to help
document your system (it does not affect application program
operation).
Comm Protect
This field applies only to Mux output points. Marking the
Comm Protect check box protects the point from changes by
communications functions such as data write, forcing and load
initial value when Comm Protect is enabled.
Initial Value
This field applies only to Mux output points. The initial value
for the output is loaded to the Regent when you load the I/O