T (3), R (10), Rs (9), and – Rockwell Automation HPK-Series Motor Encoder Replacement Installation Instructions User Manual
Page 9: Ws (8) and, S (7) fr, E (4), W (6), R (1), E (2) fro, Hpk-series motor encoder
Advertising
HPK-Series Motor Encoder Replacement Kit 9
Rockwell Automation Publication HPK-IN002C-EN-P - May 2012
HPK-Series Motor Encoder - Later Version
Item Description
Item Description
1
Encoder
6
Torx clamp screw (size T10)
2
Plastic shaft sleeve
7
7 mm (0.273 in.) outside diameter washer (qty. 2)
3
Motor shaft
8
M2.5 fixing screw (qty. 2)
4
Spring mounting plate
9
Thermostat connectors (qty. 2)
5 Spacers
(optional)
(1)
(1)
Spacers are required only if the encoder has a spring mounting plate that does not fully extend to the motor frame.
10
Encoder connector (on motor)
8
7
3
1
2
10
9
6
4
5
This diagram shows the mechanical construction of a later version encoder.
Advertising