Rockwell Automation Liqui-Flo AC Power Modules - Manual (Page 93)

Technical Specifications A-3
Table A.5 – Terminal Strip RS-232 Specifications
Signal Type Terminal(s) Specification
RS-232 Communications 1 XMIT
2 RECV
3 COMMON
Table A.6 – Encoder Feedback Device Specifications (FVC Regulation Only)
Specification Rating
Motor Poles 2, 4, 6, or 8 poles
Overcurrent IET 200% load (based on drive nameplate
rating)
Overload Current Rating 150% for 5 seconds
Speed Control Range 1:600 with 1024 PPR
Speed Control Response 15 Hz (typical)
Encoder Feedback 15 V differential quadrature, encoder
incremental (512 PPR, 1024 PPR,
2048 PPR, 4096 PPR)
Service Factor 1.0