Rockwell Automation 20D PowerFlex 700S and 700H Frame 10...12 Rectifier Module Replacement Kit - Manual (Page 13)

13
Publication PFLEX-IN023A-EN-P
Remove the Rectifier Module(s) from a Frame 10 or 12 Drive
The rectifier module(s) on frame 10 and 12 drives are contained in the right side
of the power structure(s).
Note: Cut any cable ties securing control and power cables as necessary in order
to complete the following procedures. When re-assembling the drive
components, all control and power cables must be secured with cable ties in the
same manner as they were prior to removal.
Important: Mark all connections and wires before removal to avoid incorrect
wiring during reassembly.
Rectifier module(s) located on
right side of power structure(s)
Frame 10
Frame 12