Rockwell Automation 20D PowerFlex 700S and 700H Frame 10...12 Rectifier Module Replacement Kit - Manual (Page 3)

3
Publication PFLEX-IN023A-EN-P
Bus Bar and Rectifier Module Insulator Material
The insulator sheet that is placed between the main DC- and DC+ bus bars for rectifier modules with round
SCR terminals is one piece. The insulator material provided with this kit is two pieces, one sheet for between
the main DC- and DC+ bus bars and one to cover the rectifier module.
Tools That You Need • POZIDRIV screwdriver
• Hexalobular screwdriver
• Socket wrenches and extensions
• Torque wrench
• Wire cutter
• PowerFlex 700H and 700S maintenance stand for Rittal TS8 enclosures only
(catalog string: 20-MAINSTD) (recommended)
• Lifting equipment capable of securing, holding and lifting the 210 kg (463
lb) frame 11 power structure
• Multi-meter - Digital multi meter, capable of ac and dc voltage, continuity,
resistance, capacitance measurements, and forward diode bias tests
POZIDRIV
®
is a registered trademark of Phillips Screw Company.
Bus bar insulator material
provided in this kit Rectifier module insulator
material provided in this kit