Rockwell Automation MPL-980-FAN-X245 MPL-980 Motor Fan Kit Installation Instructions User Manual
Mpl-980 motor fan kit, Installation instructions, About this publication
Installation Instructions
MPL-980 Motor Fan Kit
Catalog Number MPL-980-FAN-X245
About This Publication
This publication provides instructions to mount the cooling fan accessory on these motors.
Cooling is optimized by a setback at the front of the motor that makes sure the airflow is
unrestricted.
Use this document with the MP-Series Low Inertia Servo Motor with 215 mm or Larger Frame
Size Installation Instructions, publication
.
Contents of the Kit
The fan kit contains a metal shroud with a cooling fan, and a hex-head cap screw. The cap screw
is sized to fit the eyebolt hole on the front of the motor.
You must supply the copper power cable with a 75 °C (167 °F) minimum rating. Phasing of main
AC power is arbitrary and an earth ground connection is required for safe and proper operation.
Topic Page
• MPL-B980E-MJ22AA
• MPL-B980E-MJ72AA
• MPL-B980E-MJ24AA
• MPL-B980E-MJ74AA
IMPORTANT
The National Electrical Code and local electrical codes take precedence
over the values and methods provided.