Rockwell Automation LiquiFlo 1.0 and 1.5 External Bus Resistor Kit (500/640 Amp) - Manual (Page 7)

Instruction Manual D2-3536 7
Step 5: Unplugging
Connectors P1 and P2 and
Routing the Wiring Harness Locate the P1 and P2 Connectors near the upper part of the power structure
and unplug them.
Route the harness from the resistor assembly to P1 and P2.
Important: The harness connections are considered power level wiring.
Run them separately from I/O and signal wiring.
P1 and P2
Push Here
to Release
Connector