Certifications – Rockwell Automation 1440-RMA00-04RC XM-440 Master Relay Module User Manual
Page 11
Rockwell Automation Publication ENMON-IN440I-EN-P - February 2014
11
XM-440 Master Relay Module
Certifications
Wiring category
(1)
2 - on relay and shielded signal ports
3 - on Serial and power ports
2 - on XMbus ports
Wire type
Signal connections: shielded
Power and relay connections: unshielded
Pilot duty rating
Relay ports: Not rated
North American temp code
T4A
IEC temp code
T4
(1) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and Grounding Guidelines, publication
.
Certification
(1)
(when product is marked)
(1) See the Product Certification link at
http://www.rockwellautomation.com
for Declarations of Conformity, Certificates, and other certification details.
Description
c-UL-us
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E234338.
c-CSA-us
CSA Certified Process Control Equipment for Class I, Division 2 Group A,B,C,D Hazardous Locations, certified for US and Canada. See CSA File 150115.
CE
European Union 2004/108/EC EMC Directive, compliant with:
• EN 61326-1; Meas./Control/Lab., Industrial Requirements
• EN 61000-6-2; Industrial Immunity
• EN 61000-6-4; Industrial Emissions
• EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2006/95/EC LVD, compliant with:
• EN 61131-2; Programmable Controllers (Clause 11)
C-Tick
Australian Radiocommunications Act, compliant with:
• AS/NZS CISPR 11; Industrial Emissions
Ex
European Union 94/9/EC ATEX Directive, compliant with:
• EN 60079-15; Potentially Explosive Atmospheres, Protection "n"
• EN 60079-11; Explosive Atmospheres, Protection "i"
• EN 60079-0; General Requirements
• II 3 G Ex nAC [ic] IIC T4X Gc
when used at or below 60V AC or 75V DC
KC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
• Article 58-2 of Radio Waves Act, Clause 3
Attribute XM-440