Installation – Rockwell Automation T8300 Trusted Expander Chassis User Manual
Page 14
Trusted
TM
Expander Chassis T8300
Issue 13 Jul 12
PD-T8300
14
2. Installation
The Trusted
TM
Expander Chassis is installed into a swingframe-mounted, or fixed frame as shown in
Figure 9 using M5 x 12 Pan Head Taptites screws.
Figure 9 Installation of Chassis
Note that only the inner pair of holes in the mounting ears are used at this stage to secure the Chassis
in the swingframe. The outer holes are used to fit the plastic facia ears once all chassis and fan trays
are fitted and alignment is correct
Alternatively, the Chassis may be mounted on a panel, or equipment sheet using a Panel Mounting Kit
T8380 which comprises a pair of brackets with rear facing ears.
The brackets are first located and fitted using M5 fixings in four positions per bracket. The chassis is
then fitted to the front ears of the brackets using M5 x 12 Pan Head Taptites screws.