Rockwell Automation 440F MatGuard, 440F-C4000 Mat Controllers - Manual (Page 13)

Fig. 7 Detail of perimeter trim and uniting trim showing detection zone.
• For guidance on machine interfacing see Section 5.
• For details of the fixing and interconnection arrangements see Section 6.
PERIMETER
TRIM
ACTIVE
UNITING TRIM
SENSOR MAT
DETECTION ZONE
Add 52mm for each
perimeter trim (NZG 3010)
Add 10mm for
each uniting trim joint
NOMINAL MAT SIZE NOMINAL MAT SIZE
Add 95mm for each
perimeter trim (NZG 3011)
No.6 x 3/8" self tapping screw
(Not supplied)
12