Rockwell Automation DeviceNet Communications Module - Manual (Page 13)

Introduction 1-3
• 1747-6.5.2 DeviceNet Scanner Module Configuration
Manual
• 1747-5.14 DeviceNet Scanner Module Installation
Instructions
• 1771-6.5.118 DeviceNet Scanner Module Configuration
Manual
1.3 Conventions Used in This Manual
The following conventions are used throughout this manual:
• Menu commands are shown in bold type face and follow the
format Menu > Command.
For example, if you read “Select File > Open,” you should click
the File menu and then click the Open command.
• Parameters will be referenced as follows:
Parameter Name (Parameter Number)
For example: Mode (01)
• The terms MDI and DSI are used interchangeably. Both terms
refer to the serial interface.
1.4 Getting Assistance from Reliance
Electric
If you have any questions or problems with the products described
in this instruction manual, contact your local Reliance Electric sales
office.
For technical assistance, call 1-800-726-8112. Before calling,
please review the troubleshooting section of this manual and check
the Reliance drives website for additional information. When you
call this number, you will be asked for the drive model number and
this instruction manual number.