Bang & Olufsen BeoCom 3 - User Guide - Manual (Page 19)

19
Calls on the same line - Call
Waiting
Use the Flash button to place a call on
hold while you answer an incoming call,
or to switch between two calls.
You have an active call and an incoming
call is registered on the same line…
The number and name of the incoming call
appear in the display.
> Press OK or the Flash button to place the
active call on hold and answer the incoming
call.
> Press the Flash button to switch back and
forth between the two calls.
You can also end the active call and answer
an incoming call on the same line by pressing
and holding the handset cup for a couple of
seconds. The active call is then ended and the
incoming call becomes active.
Allen Anderson
1 847 555 1234
Jennifer Jones
1 847 555 4321
1:24PM Aug. 12