Bang & Olufsen BeoCom 3 - User Guide - Manual (Page 26)

26
Does BeoCom 3 work during power
outages?
In case of a power failure, BeoCom 3 can
be used for emergency outgoing calls –
albeit with reduced functionality. The
lights in the display are off, and the guide
tabs are non-functional. Only the number
keys, * and # function normally. All calls
made during a power failure are made via
Line 1. To make a call, pick up the handset
and dial the number manually.
Is the Phonebook, Caller ID list or Redial
list deleted if the power fails, or if the
telephone line is disconnected?
No. The Phonebook, the Caller ID list, and
the Redial list remain intact and fully
functional in both situations.
Why do the indicator lights flash?
The indicator lights above the buttons for
Line 1 and Line 2 flash green to indicate
that there is a call on hold on the relevant
line, and flash red to indicate an incoming
call on the relevant line.
How do I undo a step if, for example, I
press the wrong button? Can I exit a
function?
Press the C button (for ‘Clear’) to undo the
last button pressed, or to exit a menu or
function.
Why does the same number appear twice
in the Caller ID list?
You have received calls from the same
number on both Line 1 and Line 2.
I have Call Waiting. What happens if I
reject an incoming call?
If you reject an incoming call (by pressing
C), the caller will hear a ringing signal, as
though the call has not been answered.
Questions and answers