Bang & Olufsen BeoCom 3 - User Guide - Manual (Page 21)

21
In the BeoCom 3 ‘Setup’ menu,
you can:
– preset the ringing signal volume,
choose a ringing signal melody
and preset the ringing signal to
shut itself off automatically e.g.
at night;
– set the time, date and year for
the built-in clock;
– preset a fixed volume for your
phone conversations;
– choose whether or not to show
Caller ID status in the display.
Volume, melody and ringing
signal settings
When you set the ringing signal, you can
adjust the volume, choose between 8
melodies and preset the ringing signal to
shut off automatically e.g. between 10 pm
and 8 am.
Setup options for the ringing signal
If you switch off the ringing signal, BeoCom 3
will not ring. However, incoming calls are still
registered in the Caller ID list.
Ringer
Select settings On, Off, or Timed Off.
Choose Timed Off to silence the ringing
signal in a fixed period of time, e.g. between
10 pm and 8 am.
Level
Only available if Ringer is set to On or Timed
Off. Select a volume level for the ringing
signal. Options are Low, Medium and High.
Melody
Only available if Ringer is set to On or Timed
Off. Select ringing signal melody 1–8.
If you wait 3 seconds after selecting the setting
for the volume or melody of the ringing signal,
the chosen ringing signal is then played.
Settings for your BeoCom 3
Ringer settings
Ringer : Timed off
Level :
Melody : 2
Press to view the main menu
Turn the wheel to select ‘Setup
menu’ and press OK
Turn the wheel to select
’Ringer’ and press OK
Turn the wheel to choose line
1 or line 2 and press OK
Turn the wheel to select
options on the menu and press
OK
Turn the wheel to preset
ringing signal volume or
choose a ringing signal melody
Press to store your settings
Menu
OK
OK
OK
OK
OK