Bang & Olufsen BeoCom 3 - User Guide - Manual (Page 22)

22
Set the time and date
The built-in clock ensures that timer
settings for the ringing signal are executed
correctly, and that Caller ID information
includes the correct date and time of the
call.
Preset volume for conversations
The sound volume can be set to one of
eight fixed levels. This volume then applies
to the handset, the speaker and any
connected headset. Note that you can still
adjust sound volume during a call.
Display new calls
You can choose not to display information
about new calls, if e.g. you have a phone
with Caller ID connected to the same line
as BeoCom 3.
>>Settings for your BeoCom 3 – Set the time and date
Clock
Time : 12:29AM
Date : Mar. 9 - 2002
Menu
OK
OK
OK
OK
OK
Press to view the main menu
Turn the wheel to select ‘Setup
menu’ and press OK
Turn the wheel to select
‘Clock’ and press OK
Turn the wheel to select either
‘Time’ or ‘Date’ and press OK
Turn the wheel to select the
individual settings, and press
OK to move on to the next
When you have entered the
last setting, ‘Store?’ appears in
the display
Press to store the setting
Preset volume level
Start calls at
preset volume level
On
Off
Menu
OK
OK
OK
OK
Press to view the main menu
Turn the wheel to select ’Setup
menu’ and press OK
Turn the wheel to select
‘Preset volume’ and press OK
Turn the wheel to select ’Yes’
if you wish a preset volume, or
’No’ if you do not
Press OK
If you chose ’Yes’, turn the
wheel to adjust the volume
setting
Press to store the setting
Caller ID indication
Indicate new calls
On
Off
Menu
OK
OK
OK
OK
Press to view the main menu
Turn the wheel to select ‘Setup
menu’ and press OK
Turn the wheel to select ‘Caller
ID indication’ and press OK
Turn the wheel to choose line
1 or line 2 and press OK
Turn the wheel to select ‘On’ if
you wish to see new calls, or
‘Off’ if you do not
Press OK
Repeat the procedure for each
line