Bang & Olufsen BeoCom 6000 - User Guide - Manual (Page 15)

Troubleshooting via the display – the Alert menu
If conditions exist which impede or otherwise affect the optimal use of
your phone, Alert appears in the display while the handset is in standby
and remains as long as the conditions apply.
‘Alert’ appears in the display …
> Press OK to be able to view the cause of the alert
> Turn the wheel to see if other conditions apply
> Press
OK to be able to adjust relevant settings, if available
> Turn the wheel to adjust settings, and press OK to store them
If you do not wish to view the alert, simply turn the wheel.
Register
handset to base?
1:Living Room
Silenced
1:Living Room
Line is busy
No contact
with base
15
Other messages in standby:
The handset is not registered to a
base. Press OK to start the first-
time setup procedure.
The handset is silenced. Press OK
to be able to deactivate the silence
function.
The line is busy. Press , then OK to
‘break in’ on the call. This is only
possible if you use the handset
with the BeoLine base.
There is no connection between
the base and the handset.