Bang & Olufsen BeoCom 6000 - User Guide - Manual (Page 18)

Daily use
Make and answer calls
The key on the BeoCom 6000 is used to start and end a call.
During the call, the phone displays the duration of the call and the
number or name of the person called. If you do not wish to answer
a call, you can mute the ringing signal.
To make a call …
Enter the telephone number
To correct a digit, turn the wheel to move the
cursor to the digit in question and press C to
delete it
Press to make the call. The call time is shown,
and if the name is stored in the Phonebook, this
is shown as well
Press to end the call. Alternatively, place the
handset in the charger
To answer a call …
Press to answer the call
Press to end a call. Alternatively, place the
handset in the charger
To mute a handset’s ringing …
Press to mute the ringing signal for the incoming
call. The indicator light on the handset flashes
until the caller hangs up the phone
0 – 9
98765432_
98765432
C
98765432
Time: 0 :19
23456789
Time: 0 : 02
C
18
If you end a call to or from a
number not previously stored in
the Phonebook, the display
prompts you to do so. Refer to
Store a number after a call on page
22 for more information.
To get a dial tone before entering
the number, press