Bang & Olufsen BeoCom 6000 - User Guide - Manual (Page 41)

Clock … Enter the time and date.
Auto lock … Options are On and Off. Locking the handset keypad
prevents inadvertent operation of the keys. You can still receive calls, but
the handset keypad locks again automatically after you end a call.
News indicator … The news indication – the flashing red light on the
handset and the display message indicating new, unanswered calls – is
set to On from the factory, so you can see how many new calls you have
received. Options are On and Off.
Battery alert … Alerts you audibly when the handset battery requires
charging. Options are On, Off and Timed off. If you select Timed off, you
can then use the wheel to set a daily time period during which the
battery alert will not occur – for example, at night.
Auto off-hook … Switch Auto off­hook to On if you want to answer
a call as soon as you lift the handset from the charger – that is, without
pressing . Auto off­hook is set to Off when you purchase the phone. Auto
off­hook can only be used if the handset is placed in the charger. If the
hand set is not placed in the charger, you must press to answer a call.
Handset … The Handset menu contains three sub­menus:
– Enter name allows you to give the handset a new name using the
wheel and OK key. Note that this menu is called Change name after
you enter a name for the handset the first time.
– Register allows you to register the handset to the BeoLine base.
– Handset type allows you to set the handset to be Personal or Common,
as described on page 45.
Base… The Base menu contains three sub­menus:
– Remove handset cancels registration of a handset to the base.
– Open base for registration allows you to open the base for registration
of additional handsets*.
– Change PIN allows you to enter a new pincode for your base and
change the pincode. Use the number keys to enter the pincode and the
OK key to store it. The default pincode is 0000.
41
*This menu is only accessible if you
use the handset with the BeoLine
base.